Siemens A80672 Installation & Operation Manual Download Page 57

Page: 57 / 128

WEB USER INTERFACE (WEBUI)

_______________________________________________________________________________________________________________

4-23

SIG-00-13-12 February 2021
Version No.: B

•

SNMP Traps

SNMP messages sent from the PTC Console are received in the Back Office. The CDL program defines which

alarms are sent.

Table 4-1 SNMP Information

SNMP OID

VALUE

DESCRIPTION

deviceType.0

iVIU

Defines the type of equipment that sent the

SNMP trap. For the PTC Console, this field

will always contain “iVIU”

dateTime.0

03-May-2012 18:56:13

Date and Time the system created the alert

siteName.0

CP_Safetran_312

This field contains the Site Name, as set in

the PTC Console configuration settings.

milePost.0

35.2

This field contains the Milepost Number, as

set in the PTC Console configuration

settings

spareText2.0

Not used. Reserved for future use.

spareText1.0

2950240fd20218

Not used. Reserved for future use.

alarmPriority.0

The priority of the alarm as set by the iVIU’s

CDL logic. This value is specific to each

alert (see the manual for the specific CDL

program).

alarmClearFlag.0

Indicates whether this is the alarm or the

corresponding clear for the alarm.

alarmText.0

Alarm Enabled Message

The Alarm text as programmed into CDL

logic. This value is specific to each alert

(see the manual for the specific CDL

program).

alarmID.0

The Alarm ID number as programmed in the

CDL logic. This value is specific to each

alert (see the manual for the specific CDL

program).

trapNum.0

The Trap Number as programmed in the

CDL logic. This value is specific to each

alert (see the manual for the specific CDL

program).

snmpTrapOID.0

1.3.6.1.4.1.3064.3.20.2.2

The ID of the trap in the unit’s MIB. This

value is specific to each alert (see the

manual for the specific CDL program).

sysUpTime.0

1days22h55m24.59s

System Up Time

Summary of Contents for A80672

































































































































Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands

Siemens A80672, Installation & Operation Manual

Search results

Summary of Contents for A80672

Reviews:

Related manuals for A80672

Brands by name

Popular brands