Siemens A30853 Operating Instructions Manual Download Page 31

Page: 31 / 62

Calls involving two or more parties

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Disconnecting one party

You can disconnect one party in the course of a consulta-

tion call. Afterwards,you are automatically connected to

the remaining party.

Three-party conference

In a conference, all parties can listen in and talk to each

other.

You must apply to your local network operator for this

feature. Inquire about the respective charges.

In the course of a consultation call you can connect

yourself to the other two parties and set up a three-party

conference.

The call numbers of the other parties are only

displayed if they are known.
Call numbers are not displayed, for example, in

the case of incoming calls with number sup-

pression or calls from analog stations.

A consultation call is in progress.

Press the

Disconnect

key.

Enter the code “0“ or “1“ .
Enter “0“ if you want to disconnect the party, who is put

on hold (his/her call number is

not

displayed).

Enter “1“ if you want to disconnect the party, who you

are talking to (his/her call number is displayed).

A consultation call is in progress.

Press the

Conference

key.

Your are now connected to the other two parties.

The symbol

appears on the display.

Summary of Contents for A30853































































Search results

Summary of Contents for A30853

Reviews:

Related manuals for A30853

Brands by name

Popular brands

Siemens A30853, Operating Instructions Manual

Search results

Summary of Contents for A30853

Reviews:

Related manuals for A30853

Brands by name

Popular brands