Siemens A30853 Operating Instructions Manual Download Page 54

Page: 54 / 62

ISDN glossary

glossar.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

ISDN glossary

The ISDN glossary should help you understand the many new terms

and abbreviations relating to ISDN.

AOC-D

ISDN service. Abbreviation for

dvice

harge

uring Call and means

that the charge of the call is displayed during the call.

AOC-E

ISDN service. Abbreviation for

dvice

harge at the

nd of Call and

means that the charge of the call is displayed at the end of the call.

AOC-S

ISDN service. Abbreviation for

dvice

harge at the

tart of Call and

means that the charge of the call is displayed at the start of the call.

B channel

The basic channel with a maximum transmission speed of 64 kBit/s.

Basic rate access

This is the ISDN basic rate access, It is the entry-level connection type

in ISDN and offers two B channels with 64 kBit/s and a control channel

with 16 kBit/s.

Call forwarding

Forward calls to another station.

Call waiting (CW)

ISDN service. If the line is busy, a connection request is signalled

(acoustically or optically) by a call waiting signal.

CCBS

ISDN service. Abbreviation for

ompletion of

alls to

usy

ubscriber

and means that a busy subscriber will be automatically called back as

soon as he/she finishes his/her call.

CCITT

Abbreviation for

omité

onsultatif

nternational

elégraphique et

élé-

phonique which is an international consulting body for telegraphy. The

CCITT has changed over to the ITU. It publishes recommendations

which are frequently viewed as standard in the international telecom-

munications industry.

CFU

ISDN service. Abbreviation for

all

orwarding

nconditional and

means that call forwarding is possible for all incoming calls.

CLIP

ISDN service. Abbreviation for

alling

ine

dentification

resentation

and means that the calling party’s number appears on the called party’s

display.

CLIR

ISDN service. Abbreviation for

alling

ine

dentification

estriction and

means that the calling party’s number is suppressed on the calling

party’s display.

COLR

ISDN service. Abbreviation for

nnected

ine Identification

estriction

and means that the called party’s number is suppressed on the calling

party’s display.

COLP

ISDN service. Abbreviation for

nnected

ine Identification

resentation and means that the called party’s number appears on the

calling party’s display.

D-Kanal

Control channel, also known as the data channel, which is provided in

the ISDN basic rate access with 16 kBit/s and in the primary rate access

with 64 kBit/s. It is required in particular for connection setup and clear-

down.

Summary of Contents for A30853































































Search results

Summary of Contents for A30853

Reviews:

Related manuals for A30853

Brands by name

Popular brands

Siemens A30853, Operating Instructions Manual

Search results

Summary of Contents for A30853

Reviews:

Related manuals for A30853

Brands by name

Popular brands