Siemens A30853 Operating Instructions Manual Download Page 30

Page: 30 / 62

Calls involving two or more parties

kap01.fm5

27.11.98

Profiset 30isdn engl.: A30853-X300-B107-1-7619

Calls involving two or more parties

Calling the second party (consultation)

You can consult with another party in the course of a call.

The first call is put on hold during the consultation call.

Ending a consultation

When you end a consultation, you return to the caller on

hold.

Switching between two calling parties (toggling)

In the course of a consultation call you can alternate (tog-

gle) between the other two parties. The party who is wait-

ing cannot listen in.

A call is in progress.

Press the

Consultation

key.

Enter the call number of the party to be consulted.

If you hear the ringing tone:

Wenn der Rückfragepartner den Hörer abnimmt:

When the other party answers,conduct your consultation

call.

If the other party does not answer:

Press the

Consultation

key.

Your are reconnected to the first party.

If you hear the busy tone:

You are automatically reconnected to the first party.

A consultation call is in progress.

Press the

Consultation

key.

The second party is put on hold. The call is switched to

the first party.

If you want to return to the second party:

Press the

Consultation

key.

The first party is put on hold. The call is switched to the

second party.

Summary of Contents for A30853































































Search results

Summary of Contents for A30853

Reviews:

Related manuals for A30853

Brands by name

Popular brands

Siemens A30853, Operating Instructions Manual

Search results

Summary of Contents for A30853

Reviews:

Related manuals for A30853

Brands by name

Popular brands