UM91-HF
3)
To install replacement parts:
a.
Order repair kits; see the assembly drawing for part numbers.
b.
Shut off supply air. Back out the adjusting screw.
c.
Remove four corner bolts from bottom of unit and four screws on the top. Remove all parts.
d.
Replace all parts that show excessive wear.
e.
Clean all parts and replace in the reverse order.
CUSTOMER/PRODUCT SUPPORT
For support and the location of your local Siemens representative, refer to the table below for the URL of the Process
Instrumentation (PI) portion of the Siemens public Internet site. Once at the site, click
Support
in the right column and then
Product Support
. Next select the type of support desired: sales, technical (see the table below), documentation, or software.
Online Support Request
http://www.siemens.com/automation/support-request
Technical Support
1-800-333-7421; 8 a.m. to 4:45 p.m. eastern time, Monday through Friday (except
holidays)
Customer Service & Returns
1-800-365-8766 (warranty and non-warranty)
Public Internet Site
Technical Publications
in PDF
Click the above link to go to the Siemens Internet site and then click
Process
Instrumentation
. In the column to the right, click
Support
>
Manuals
. In the
column to the left, select the product line (e.g. Pressure or Temperature or
Controllers) to open navigation and search panes. Note: Navigation may change as
the site evolves.
Warranty
The sales contract contains the entire obligation of Siemens. The warranty contained in the contract
between the parties is the sole warranty of Siemens. Any statements continued herein do not create new
warranties or modify the existing warranty.
All product designations may be trademarks or product names of Siemens Industry, Inc. or other supplier companies whose use by third
parties for their own purposes could violate the rights of the owners.
Siemens Industry, Inc. assumes no liability for errors or omissions in this document or for the application and use of information in this
document. The information herein is subject to change without notice.
Procedures in this document have been reviewed for compliance with applicable approval agency requirements and are considered sound
practice. Neither Siemens Industry, Inc. nor these agencies are responsible for product uses not included in the approval certification(s) or
for repairs or modifications made by the user.
4
