Manual 7XV5655-0BB00
SIEMENS AG
Page 3 of 79
C53000-G1176-C175-3
General Information
This manual contains the information that is necessary for proper and safe operation of
the products described. This manual is intended for technically qualified personnel
having received special training in, or having special knowledge of protection,
measurement and control engineering, hereinafter called automation engineering. The
knowledge and correct application of the warnings and instructions contained in this
manual are prerequisites to safe installation and commissioning of this product, as well
as to proper and safe operation and maintenance. Only qualified personnel as defined
overleaf have the special knowledge required for correct interpretation of the general
safety information and warnings given in this manual, and for their application to the
task in hand. This manual is included in the scope of delivery. For reasons of clarity,
however, it does not purport to contain every detail of all versions of the product
described, nor can it deal with all possible cases of erection, operation or maintenance.
If further information is desired or if special problems arise that are not treated
adequately in this document, it is possible to obtain additional details from your local
Siemens office or from the addresses stated on the back of this manual.
We should also like to point out that the contents of this product documentation are not
part of any previous or existing agreement or legal relationship, nor are they apt to
modify such an agreement or relationship. All obligations incurred by Siemens result
from the purchase contract, which also contains the complete and solely applicable
warranty conditions. Contractual warranty conditions are neither extended nor restricted
by the contents of this document.
Disclaimer of Liability
We have checked the contents of this document and
every effort has been made to ensure that the
descriptions of both the hardware and software are as
accurate as possible. However, since deviations cannot
be ruled out entirely, we do not accept liability for
complete conformity or for any errors or omissions.
The information given in this document is reviewed
regularly and any necessary corrections will be included
in subsequent editions. We are grateful for any
improvements that you care to suggest.
Subject to technical modifications without notice.
Release 2.00.00
Copyright
Copyright © Siemens AG 2008. All rights reserved.
The reproduction, transmission or use of this document or
its contents is not permitted without express written
authority.
Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility
model or design, are reserved.
Registered Trademarks
SIPROTEC, SINAUT, SICAM and DIGSI® are registered
trademarks of SIEMENS AG. Other designations in this
manual might be trademarks whose use by third parties for
their own purposes would infringe the rights of the owner.
