A 1
2
/
03
Repeater 820nm / 1300nm Page 27 of 32
s
Page 26 of 32 Repeater 820nm / 1300nm A 1
2
/
03
s
1.7
Settings
All settings on the signal converter can be made from outside by means
of a DIL switch. It is not necessary to open the housing.
The settings are described in Section 1.4.2
1.8
Maintenance
The signal converter is maintenance-free.
Do not use liquids for cleaning the unit.
Inbetriebnahme
• Check if the operating data correspond to the values stated on the
rating plate.
• Do not modify the signal converter in any way whatsoever.
• Snap the mounting device of the signal converter onto a DIN rail.
• Connect the auxiliary power to terminals -X2/1(DC :L+ / AC: L) and
X2/2 (DC: L- / AC: N).
• Connect the FO cable assemblies with BFOC ST-connectors to
receiver R1 and transmitter T1 on the 1300 nm side and the FO
cable assemblies with FSMA screw-type connectors to receiver R2
and transmitter T2 on the 820 nm side.
• The signal converter is now operational as soon as the auxiliary
power supply is energized. The green LED lights to indicate that the
unit is operational.
