Commissioning
5.2 Commissioning the modem
Modem and SIPROM T for SITRANS TH100/TH200/TR200/TF200/TF with TH200
34
Operating Instructions, 06/2014, A5E00468983-04
Note
If you are using the USB modem for parameterization of
SITRANS TH100/TH200/TR200/TF200/TF with TH200, do not disconnect the USB
connector from the PC or the modem during the parameterization process.
Note
RF interference
The MODEM is a class A device. This device may emit RF interference in residential areas.
In this case, you need to take appropriate measures.
Note
Interference emission of RF transmitters
The parameter assignment is intended only for use in a controlled electromagnetic
environment. RF transmitters such as mobile phones may not be used in the immediate
range.
5.2
Commissioning the modem
Note
The input variable is digitally requested and displayed by the PC during the parameterization
process. The analog output current always remains constant.
You can use the SIPROM T parameterization software and the modem for
SITRANS TH100/TH200 for changing the configuration of the transmitter via your PC. For
this purpose, simply connect the transmitter to the PC via the modem. The power required
by the transmitter is provided by:
●
the USB port of the PC (in case of the USB modem)
●
an external power adapter (in case of the RS232 modem)
Refer to figures "Parameterization via the USB modem" and "Parameterization via the
RS232 modem".
