Siemens 6GK5 615-0AA00-2AA2 Operating Instructions Manual Download Page 41

Page: 41 / 80

Installation and removal

4.7 Installation in a 19" mounting frame

SCALANCE S615
Operating Instructions, 10/2022, C79000-G8976-C389-07

4.7

Installation in a 19" mounting frame

The 19" mounting frame is for installation of 2 SCALANCE S devices in a 19" rack.

NOTICE
Approvals

Installation in a 19" mounting frame does not meet the requirements of the approvals:

ATEX, IECEx, FM, UL and UL Haz-Loc.

Operating temperature

Due to the horizontal installation, the maximum permitted operating temperature of the

SCALANCE S615 is reduced to 40° C.

Installation

Push the devices into the mounting frame.

Press the devices with slight pressure onto the back wall until the spring catch locks in place.

Screw the mounting frame in the 19" rack. For the precise dimensions, refer to the section

"Dimension drawings (Page 70)".

Connect the power supplies, refer to the section "Power supply (Page 51)".

Fit the connectors for the digital input and digital output, refer to the section "Digital

input/output (Page 53)".

Summary of Contents for 6GK5 615-0AA00-2AA2

















































































Search results

Summary of Contents for 6GK5 615-0AA00-2AA2

Reviews:

Related manuals for 6GK5 615-0AA00-2AA2

Brands by name

Popular brands

Siemens 6GK5 615-0AA00-2AA2, Operating Instructions Manual

Search results

Summary of Contents for 6GK5 615-0AA00-2AA2

Reviews:

Related manuals for 6GK5 615-0AA00-2AA2

Brands by name

Popular brands