Configuration
4.9 Cloud configuration
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
95
Data point assignment
You assign the data points of the stations in the data point table consecutively or by station
to the configured topics or groups.
●
Select station
You first select one or all stations using the drop-down list. By selecting one station, you
can increase the clarity of the following data point table.
The data point table lists all data points that are configured in the stations selected above.
You can assign the data points to the topics / groups individually or as a bundle.
Individual assignment:
Assign each data point in the data point table individually to a topic or a group.
Bundled assignment:
Before you make the bundled assignment, select all data points in the table that you want
to assign to a topic using the check box on the left.
Then use one of the two buttons described below.
●
Topic / Group
Text box with filter
When entering individual characters, all topics or groups that start with the entered
characters or contain these characters are shown. Click on an entry to select a topic or
group.
●
Set for selected
By clicking on the button, all data points that you have previously selected in the table are
assigned to the topic or group selected in the text box.
●
Set for all
By clicking on the button, all data points that you have previously selected in the table are
assigned to the topic or group selected in the text box.
Data point table
●
Data point name
Configured name of the data point
●
Data type
Configured data type of the data point
●
Data type alias
Data type of the data point output by the device in the user data (DATAPOINT_TYPE)
●
Station
Configured station name
You specify the station name on the "Process access" page, see section Station
configuration (Page 63).
