KTP700F Mobile Arctic
10
A5E49199858-AB, 02/2021
Features
Front
•
The external dimensions of the front correspond to the standard product
•
GFG (Glass-Film-Glass) touch screens, analog resistive
•
Decorative film with printing
Display
•
High-resolution TFT display in widescreen format with 16 million colors
•
Suitable for use in daylight
•
Anti-reflective and bonded for glare-free reading
Touch screen
•
Resistive single touch screen
•
Suitable for operation with gloves, pen and fingers
Operator controls
•
8 function keys
•
2 illuminated pushbuttons
•
Emergency stop/stop pushbutton
•
Enabling button
•
Keyswitch
Interfaces
•
1 PROFINET/Industrial Ethernet
•
SD card slot
•
USB 2.0 ports: 1 x USB host interface (type A) with cover
Differences compared to the standard product
In contrast to the basic device the HMI device is distinguished by the following features:
Temperature
Extended operating temperature range "Arctic"
Touch pen
A touch pen, which is placed centrally under the display, is integrated in the front.
Required software
You require the following software to configure the device:
•
WinCC (TIA Portal) V15.1 SP1 or higher (Comfort/Advanced/Professional)
•
Hardware Support Package (HSP) for TIA Portal V15.1 or V16.
NOTICE
Installation of the Hardware Support Package (HSP)
You can find the appropriate HSP in the following entry on the Internet: Support Package for KTP700F Mobile Arctic
https://support.industry.siemens.com/cs/ww/en/view/109781303
•
Proceed exactly as described there.
•
Observe all components and notes.
In TIA Portal > V16, the device is permanently integrated in the TIA Portal and no installation of an HSP is required.
