Siemens 4075, Operating Instructions Manual

Page: 51 / 92

51
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Anrufbeantworter.f 5.7.01
Step
by
Step
3000 Comfort: [

] [OK]
Service Set up
o
Answering machine
o
(required AM)
4000 Comfort: [
*
] [OK]
Anrufbeantw.
o
(required AM).
Picking up a call from an answering machine
To pick up a call from an answering machine, you need at least the “Incoming
only” access (Defining authorizations see page 55).
Activating/deactivating automatic AM pickup
Press or
*
for selection menus.
Select using [

] and [OK]: Service Set up or Base Set up
o
Settings
o
System
settings
o
AM Auto.Pickup
Picking up a call
A call is recorded. You answer the call using the D button.
Direct (setting AM Auto. Pickup is active)
Press D .
or Indirect (setting AM Auto. Pickup is not active)
Press D .
Listen in on the call: press [OP.LIST], this allows you to listen in without the
caller noticing.
Pick up the call: press [ACCEPT].
Querying the answering machine status
You can check the number of new and old messages (memos) and the
answering machine settings.
Select answering machine (see below)
o
Status
o
Messages
(or memos).
The number of new and old messages (memos) is displayed.
or
Instead of messages (memos), you can also check the following settings:
–
Announcement
(type of announcement)
– Recording (length/quality)
– Time control (on/off, announcement start times)
– Start option (number of rings)
– Playback (type, automatic pause)
– Remote options (remote control: on/off, remote delete: on/off)
– General (language, remaining memory)
Remote control of the answering machine
You can control your answering machine from any registered handset or
externally, e.g. listening to and deleting messages. The same procedures apply
for both remote control functions, the only difference is the way in which
remote control is activated. For remote operation
you need to modify the
answering machine PIN (factory setting: 0000) to ensure maximum security.
To ensure full functionality for this type of operation, remote control and remote
delete must be enabled.
1.
2.
1.
1.
2.
3.