46
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Anrufbeantworter.f
5.7.01
Step
by
Step
3000 Comfort:
[
] [OK]
Service Set up
o
Answering machine
o
(required AM)
4000 Comfort: [
*
] [OK]
Anrufbeantw.
o
(required AM).
Answering machine (4075isdn
only)
The Gigaset 4075isdn has three answering machines (AMs). Any MSN can be
assigned to any answering machine. However, an individual MSN cannot be
assigned to more than one answering machine at a time. Only one message
can be recorded at a time.
Access options for the answering machine
No MSN configured (default configuration):
– In this case all the connected devices have access to the three AMs. On
activation, AM 1 receives calls to all the MSNs.
One or more MSNs have been assigned:
– The relevant AM can only be set and accessed by devices with the same
MSN.
– Exception: an answering machine which is the only device in the system to
be assigned to a particular MSN can be operated from all connected devices.
Selecting an answering machine
for Gigaset 3000 Comfort
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
o
Answ.Machine
o
(required AM)
.
for Gigaset 4000 Comfort
Press
*
for the selection menus.
Select using [
*
] and [OK]: Anrufbeantw.
o
(required AM)
.
The list of answering machines only contains those answering machines
assigned for this Comfort handset. If only one answering machine can be
accessed from this Comfort handset, the selection list is ignored.
On the Gigaset 4000 Comfort you can access the list of answering machines
by a long press on digit key 1.
Activating/deactivating the answering machine
Select answering machine (see below)
o
Activate?
or
Deactivate?
Activating an announcement
You can activate announcement 1 or 2, or the information announcement. If
available, the concluding announcement is automatically activated in
connection with announcement 1 or 2.
If you have not recorded an announcement, the factory default announcement
is used.
Select answering machine (see below)
o
Announcements
Select using [
] and [
9
]:
(required announcement)
.
Select using [
] and [OK]:
Select
.
1.
2.
1.
2.
1.
2.
3.
