44
Gigaset 4070/4075isdn, Domestic, A31008-G3070-B001-53-
Anlage.fm
5.7.01
Step
by
Step
If you have also entered a rate (see Section , “Entering the price per unit”) the
call costs will be multiplied by this rate. You can also use a rate if you want to
bill for higher call costs, otherwise disable the rate (the cost display is to be
increased by factor 2, for example).
Setting up “Units from CO”
for
(Gigaset 3000 Comfort)
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
o
Settings
o
System settings
o
Costs
for
(Gigaset 4000 Comfort)
Press
*
for the selection menus.
Select using [
] and [OK]:
Costs
.
Enter the PIN and confirm with [OK].
Select using [
] and [OK]:
Access type
.
Select using [
] and [OK]:
Units Centr.Off.
If the item is marked, the units transmitted by the provider will be displayed or
used to calculate the costs. If the default setting “No Rate” is used, the units
will be displayed.
Entering the price per unit
Before the charges for each call can be calculated, the currency and price per
unit must be defined (the default setting is “No Rate”). For determining the
costs, “Units from CO” must be set (default).
for Gigaset 3000 Comfort
Press
for selection menus.
Select using [
] and [OK]:
Service Set up
o
Settings
o
System settings
o
Costs
for
Gigaset 4000 Comfort
Press
*
for the selection menus.
Select using [
] and [OK]:
Costs
.
Enter the PIN and confirm with [OK].
Select using [
] and [OK]:
Access type
.
Select using [
] and [OK]:
Rate --.--
(with decimal point) or
Rate ----
(without decimal point).
Enter the basic price and confirm with [
9
].
Select using [
] and [OK]:
Save entry
.
If you would like to set an additional currency:
Enter the currency and confirm [
9
].
Select using [
] and [OK]:
Save entry
.
If [No Rate] was already set a prompt is displayed.
Confirm the prompt for accounting method with [YES].
All accounts are reset and the option is highlighted.
Info
1.
2.
1.
2.
3.
4.
5.
1.
2.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
