14
3RK1703-2WB02-1CA1
Slaves without parameter string, e.g. digital slaves
Select a new parameter value.
The hex value blinks on the main display.
↵
Transfer the parameter to the slave.
Changed parameters which have been transferred to the slave can be deleted with
clr0
after setting the rotary selector switch to Memory.
echo
XH: The received parameter echo is displayed in hexadecimal format.
Memory
memo
:
Loading, saving, deleting and copying data records
All addresses included within a system which has been saved to memory can be
transferred to the individual slaves for a new system, one after the other, in the "copy"
operating mode.
ESC
Display of the available memory capacity in %.
↵
Deleting data records
clear
clr
x
Delete contents of memory address 0 (RAM), or memory address 1, 2, 3 or 4, or ALL
(0 through 4).
Loading data records
recall
rcl
x
Load the contents of memory address 1, 2, 3 or 4 to memory address 0 (RAM).
Saving data records
store
sto
x
Save contents of memory address 0 (RAM) to memory address 1, 2, 3 or 4.
Copying slave addresses
copy
cpy
x
ready
setto
clradr
or ESC
cpy
x
: Copy all addresses from memory address x.
Connect the slave via the addressing plug. The corresponding address of the connected
slave blinks on the display.
setto
: Start transfer of the address.
clradr
: Delete the slave displayed in the address field.
empty
appears after all
addresses have been transferred.
ESC
: If several slaves are to be programmed with the same profile, this address is not
deleted from the address field.
ready
: Prompts user to select next slave.
888
888
888
888
888
888
