Siemens 3PCI Series, Operation Manual

Page: 36 / 54

Addendum 3PCI SCR Power Controller Series Manual
A-2
s
Version 1.2 (19000325)
PR Pos “C” (PR) Power Regulation J3, J4 Pos “A”
RROCT J6 – Zero ohm resistor normally installed by PCB vendor
Zero ohm resistor removed for remote reset OCT when required
J7 – Normally in Pos “A”
“Open” will give a 10 times longer ramp speed on all selected ramp speeds.
5.3 Final Test
5.3.1 Once the above steps are completed, test the 3PCI GTU with the customer SCR panel
assembly in accordance with PSI-Oxx Maxie testing procedure.
5.3.2 Add a label below the 460T41.00, 460T23.00 if the customer requires a P/N to reflect the old
number. Since any of the new PWBA’s can replace any old PWBA and are forward and
backward compatible.
Draft Authorization for Sign-off
Originator Consensus Member Consensus Member
Consensus Member Consensus Member Consensus Member