25
Switching functions
You are conducting an internal or external call and would
like to obtain some information from an internal or external
user:
Press the recall key and immediately
dial the number of the subscriber and
conduct the consultation call.
Ending a consultation:
Press the recall key.
You can shuttle between the two users during a consultation
call:
Enter the code.
You can shuttle between the users as
often as you like by entering the code
again.
Consultation during a call
Shuttle – switching between two users
Note:
●
The shuttle function cannot be performed with a voice
mail system info box.
●
Pressing the on-hook key cancels the shuttle function.
The system performs an automatic recall if a user is
still waiting on the line.
26
Switching functions
This function allows you to set up a telephone conference
with up to five users.
You are conducting a call and wish to set up a telephone
conference with a further user:
Press the recall key and immediately
dial the number of the subscriber.
Press the recall key.
Enter the code for "conference" –
the
current number of users is displayed,
e.g. "3"; all three users are now con-
nected.
You can now
●
add other users: repeat the procedure.
●
end the conference: press
.
Conference
27
Switching functions
Like other Hicom telephones, the mobile unit allows you to
perform the following functions by entering codes. The codes
in your system may deviate from the standard codes speci-
fied here. Consult your system administrator if you have any
queries about the codes in your system.
The confirmation tone indicates a successfully com-
pleted function. The error tone is audible in the event of a
malfunction, see also page 59.
You can store frequently used functions as short cuts (see
page 40) or as Select Service functions (see page 51). This
depends on the status of the mobile unit when the function is
started. The functions in this overview are, therefore, marked
with (Short cut) or
to indicate how they are stored.
Overview - code functions
Functions
1
)
Standard
code
System-
specific
code
2
)
Accept call waiting
(Short cut)
Answer call from a (second) waiting
party (second call).
✱
55
Do not disturb on
off
Prevent incoming calls.
✱
97
#97
Call forwarding on
all calls
external calls only
internal calls only
Call forwarding off
Forward calls to an other telephone.
✱
11+ph.no.
✱
12+ph.no.
✱
13+ph.no.
#1
Call distribution (ACD)
Register (beginning of work period)
De-register (end of work period)
Temporary de-registration
Acknowledge after de-registration
Request wrap-up time
Acknowledge wrap-up time
ACD night service
on
off
Distribute call in a team.
✱
401
#401
✱
402
#402
✱
403
#403
✱
404
#404
Associated service
Activate or deactivate functions for
other telephones.
✱
83+
services
procedure...