ENGLISH
12
610.40 700.21
Siemens AG
3.2
Features
Types of construction
IM B5 (IM V1, IM V3)
(EN 60034-7)
Degree of protection
IP64
(EN 60034-5)
Cooling Self-cooling
(EN 60034-6)
A-grade sound intensity level
(EN 60034-9)
for speed range up to 3,000 rpm
1FK7 02., 1FK7 03., 1FK7 04.
approx. 55 dB(A)
1FK7 06.
approx. 65 dB(A)
1FK7 08., 1FK7 10.
approx. 70 dB(A)
Thermal motor protection
Temperature sensor KTY84
(EN 60034-11)
in the stator winding
Shaft end
cylindrical; without keyway,
(DIN 748-3; IEC 60072-1)
Tolerance range k6
true running, coaxiality, axial run-out deviation Tolerance N
(DIN 42955; IEC 60072-1)
Vibration severity
Grade N
(EN 60034-14)
Bearing
Rolling contact bearing with permanent
grease lubrication (lifetime lubrication)
fixed bearing on non-drive end
Service life of bearing
20000 h (guideline)
Winding insulation
Temperature class F
(EN 60034-1)
Ambient temperatures
-15 °C to +40 °C (5 °F to 104 °F)
otherwise the rated data are reduced
to 50 °C conversion factor 0,92
to 60 °C conversion factor 0,82
Installation altitude
up to 1000 m a.s.l,
(EN 60034-1)
2000 m conversion factor 0,94
2500 m conversion factor 0,9
Magnetic material
Rare-earth material
Electrical connections
Revolving plug for output and
encoder signals
Encoder system
fitted encoder
- speed recording
- recording the rotor position
- indirect positional recording
Additional technical parameters, dimensional sheets according to project planning guide
"Three-Phase Servomotors“, order no. 6SN1197-0AC20-0AP.
Options/expansions
Low inertia series
HD (High Dynamic)
Type of protection
IP 65; additional drive end flange IP67
(EN 60034-5)
