Add-on
modules
Upgrading the processor
1
2
Remove the old processor from the socket.
Insert the new processor in the socket so that the mark on the upper side of the
processor (2) matches the mark on the socket (1).
The mark on the processor may be covered by a heat sink. In this case let
yourself be guided by the marking in the rows of pins on the underside of the
processor.
Set the jumpers BLOCK2-33/25M, BLOCK2-DX/SX and BLOCK4 according to
the inserted processor.
Upgrading the video memory
If your PC is supplied with a video memory configuration of 512 Kbytes, you may
enlarge the video memory up to 1 Mbyte.
!
Information on which DRAM components you can use is available from your
sales office or the customer service.
Note the location of the DRAM chip when you plug in DRAM chip!
A26361-D824-Z120-5-7619
25
Add-on modules
1
2
Insert the DRAM component in such a way that the mark on the upper side of
the DRAM component (2) matches the position of the mark on the socket (1).
Replacing the lithium battery
!
Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery
type recommended by the manufacturer (CR2032).
Do not throw lithium batteries into the trashcan. Your vendor or dealer or
their authorized representatives will take used batteries back free of charge
so that they can be recycled or disposed of in the proper manner.
Make sure that you insert the battery the right way round. The plus pole
must be on the top.
1
2
3
+
+
+
+
Lift the contact (1) a few millimeters and remove the battery from its socket (2).
Insert a new lithium battery of the same type in the socket (3).
26
A26361-D824-Z120-5-7619
