IV431E REV. 00 Issued: 2020/11/16 User Manual Soleil SPX 200K-250K
Pag. 33 of 76 +FR
You can also directly mark the location of the holes according to the size of the mounting holes (see
Figure3-20).
Figure3-20
Mounting hole size(unit: mm)
Step 3
According to the marked position, use a hammer drill to drill holes on the wall. Drilling hole size is
Φ14.5mm, depth range is 55~60mm
.
Figure3-21
Drilling holes
After drilling, please clean the residues in the holes, and measure the depth of each hole to ensure that
the depth of each hole is the same.
Step 4
Install expansion bolts. Install the four M10*80 expansion bolts into the installation holes, as shown in
Figure3-22.