IV405E Rev.000 SIEL S.p.A.
Data di emissione: 2018-06-22
Pag. 25 di 50 + FR
Ⴗ
At the window of “Data Set”, click “Work Mode”,, choose “Parallel” for the value, then click
“Set” as shown in below picture. If the UPS sounds a “beep”, that means the setting is correct.
Ⴗ
At the window of “Data Set”, click “Ups ID”, write a value for the parallel UPS ID at the right
side, such as “1”, then click “Set” as shown in below picture. If the UPS sounds a “beep”,
that
means the setting is correct.