Assembly Instructions
AEROMAT VT WRG 1000
Last update: 10.2014
3
Target group of this documentation
This documentation is intended to be used by specialists only. All work described in this document is to be performed by
experienced professionals with training and practice in the assembly, installation and maintenance of ventilation units. Safe
and proper assembly of this unit is not possible without expert knowledge.
Intended use
•
The AEROMAT VT WRG 1000 is intended for installation in the exterior windows/walls of permanent structures in
accord ance with our installation and design documents as well as the specifications of our assembly instructions and is
only suit able for the ventilation of enclosed rooms.
•
The AEROMAT VT WRG 1000 must be installed in the intended installation position (horizontal or vertical). The intended
in stallation position is based on the weather grille that is preassembled at the factory.
Weather grille
Installation position
911 HW
Horizontal
911 HW-g (verdeckter Einbau Brüstung)
Horizontal
911 CW
Horizontal
911 HS
Vertical
911 CS
Vertical
•
Do not use the AEROMAT VT WRG 1000 in environments with corrosive or explosive atmospheres (dust, vapour or gas).
Summary of Contents for AERO AEROMAT VT WRG 1000
Page 11: ......
