3 YEARS
LIMITED WARRANTY
10
Depth adjustment (See Fig. 3)
a. Unplug your circular saw.
b. Loosen the depth clamp lever on the depth guide
on the back of the saw.
c. Hold the base plate against the edge of the wor-
kpiece and lift the saw body until the base is at the
depth determined by the depth gauge (align the
scale line).
d. Secure the motherboard by pressing the lever.
ATTENTION: Always maintain the blade depth
setting correctly. Excessive blade depth increases
the chance of a saw butt.
Angle adjustment (see fig. 4)
a. Loosen the bevel scale holder to adjust the angle.
b. Adjust the motherboard to the desired angle
between 0º and 45º.
c. Tighten the bevel scale bracket.
Summary of Contents for HM718
Page 32: ......
