7
Stabilizer Operation and User guide
version 5288-2 - 2018
Installation Instructions PANEL MASTER
2
BASIC PANEL GUIDE
2. ACTIVATE Stabilizers
From HOME menu:
Touch STABILIZER
2.1. Fins are locked and system in OFF status
2.2. Activate Stabilizers to
CRUISING
mode:
Touch ON/OFF button - system is starting
2.3. Stabilizers are active in
CRUISING
mode
Usually in use from 3/4 knots and up.
Note! System change automatically between Cruising/
At Anchor when both is activated.
2.4. Activate Stabilizers to
AT ANCHOR
mode:
Touch ANCHOR button - system is starting and running
Usually in use from 0 to 3/4 knots.
To turn At Anchor OFF, touch Anchor again.
Note! System change automatically between Cruising/
At Anchor when both is activated.
2.5. Turn system
OFF
:
Touch ON/OFF button - fins are centred, locked and not active
3
Installation Instructions PANEL MASTER
BASIC PANEL GUIDE
3. BACKING the yacht
When the yacht/gearbox is put in reverse the fins will automati-
cally be centred and locked.
BACKING will be indicated on the screen
4. ALARMS
4.1. Alarms are indicated in upper left corner of the screen
Touch the red alarm bell to view alarm list
4.2. Alarm list shows current alarms, with alarm description
To acknowledge alarm(s) touch ACKNOWLEDGE ALARMS in
the bottom of the screen
4.3. Touch the active alarm for more details and Correct the
cause of the alarm
Alarm codes and troubleshooting actions are shown in user man-
ual. Alarm actions will also be presented in this screen. Contact
Side-Power representative.
Touch close to finish alarm acknowledgement
4.4. All alarms are acknowledged
For fault codes, troubleshooting and advanced panel information please contact your
Side-Power representative.
Use
