5
6146
2
2019
-
SH 360
MC_0056
Technical Specifi cations
EN
Motor:
Hydraulic type (specifi cations above)
.
Gearhouse:
Seawater resistant bronze. Ballbearing at propeller shaft and a combination of ball bearing and slide bearing at driveshaft.
Gears:
Hardened precision gears
Lubrication:
Oil bath from tank (gear oil EP 90)
Bearings:
Angular contact ball bearing at propellershaft and combination of ball bearing and needle bearing at driveshaft.
Motor bracket:
Seawater resistant aluminium, galvanically insulated from the motor.
Tunnel:
Cross spun with rowing G.R.P tunnel
Steel & aluminium tunnels available at request.
Propeller:
SH 100/ SH 160/ SH 240/ SH 320/ SH 360:
5-blade skewback “Q-prop” propeller, fi breglass reinforced composite.
SH 420/ SH 550
Symmetrical 4 blade kaplan propeller, fi breglass reinforced composite.
Safety:
Flexible coupling between hydraulic-motor and driveshaft protects gearsystem if propeller jams.
MG_0078
TL
WD
ID
T
Propeller position will vary
on the model
The gear leg must never extend
out of the tunnel
Tunnel centre line
Twin Propeller
H
W
L
MC_0214
Thruster Measurements
EN
Measurement
code
Measurement description
mm inch
ID
Internal tunnel diameter
300
11.81
H
Motor Height
356
14.02
W
Width
258
10.16
L
Length
258
10.16
WD
Water Depth
450
17.72
TL
Minimum tunnel length
370
14.57
TL (recommended)
Recommended tunnel length
550
21.65
T (min)
Minimum tunnel wall thickness
10
0.39
T (max)
Maximum tunnel wall thickness
*360
MC_0215
Thruster Specifi cations
EN
description
* 360
light duty thrust up to (kg * lbs)
360kg * 795lbs
Heavy duty thrust up to (kg * lbs)
270kg * 594lbs
Typical Boat Size (m * ft)
18m - 33m * 59ft - 108ft
Propulsion System
Twin Counter Rotating
Power (kw * Hp)
27kw * 37hp
Weight (kg * lbs)
26 kg * 57.32 lbs
Lubrication
Sealed
