2
SE170/250TC Ignition Protected thruster assembly
version 1.3 - 2015
Technical specifications
............................................................. 2
Planning & important precautions.............................................. 3
Stern thruster installation considerations................................... 3
Bolt on installation .................................................................... 4
Mould on installation ................................................................. 5
Gearhouse and motorbracket .................................................... 6
Oil tank & propellers ................................................................. 7
Electromotor IP assembly .......................................................... 8
Electrical installation ................................................................. 9
Control panel and control-leads............................................... 10
Visual wiring diagram .............................................................. 11
Technical wiring diagram ........................................................ 12
Electrical installation of stern thruster systems ........................12
Checklist .................................................................................. 13
Important user precautions ...................................................... 14
How to use Sidepower thrusters.............................................. 15
Maintenance ............................................................................ 16
Troubleshooting ....................................................................... 17
Warranty statement ................................................................ 18
Parts list ................................................................................... 19
Service centres ....................................................................... 20
Contents
Motor:
Custom made reversible DC-motor.
Gearhouse:
Seawater resistant bronze. Angular contact ball bearing at propeller shaft and combination of ball bearing and
needle bearing at driveshaft.
Motor bracket:
Seawaterresistant aluminium.
Ignition protection:
Conforms to ISO 8846
Propeller:
5-blade skewback "Q-prop" propeller., fiberglass reinforced composite.
Batteries:
Minimum recommended battery capacity (cold crank capacity by DIN standard)
SE170/250TC. 500CCA DIN/950 CCA SAE
Max. use:
S2 = 3 min. or appr. 7-10% within a limited time frame. All electromotors are protected against overheating.
Safety:
Electronic time-lapse device protects against sudden change of drive direction. Electric thermal cut-off switch in
electro motor protects against over heating (auto reset when electromotor cools down).
Flexible coupling between electro motor and driveshaft protects electromotor and gearsystem if propeller gets
jammed.
If original Sidepower panel is used, the panel shuts off automatically 6 minutes after last use.
Integrated microprocessor monitors solenoids, reducing wear and risk of solenoid lock-in. Auto-stop of thruster in
case of accidental solenoid lock-in or if run signal is continuous for more than 3 minutes.
Technical specifications
DECLARATION OF CONFORMITY
We,
Sleipner Motor AS
P.O. Box 519
N-1612 Fredrikstad, Norway
declare that this product with accompanying
standard remote control systems complies with the
essential health and safety requirements according
to the Directive 89/336/EEC of 23 May 1989
amended by 92/31/EEC and 93/68/EEC.
Sleipner Motor AS constantly seek ways of improving
specifications, design and production. Thus, alterations
take place continuously. Whilst every effort is made to
produce up-to-date and detailed literature - minor changes,
some details of the physical shapes or printing errors
might occur so that it is important that you physically
check space requirements and layout in the boat before
starting to install the product in a confined space.
Responsible installer must
consider and facilitating
enough space and access
regarding installation,
service and maintenance
of the thruster.
C
A
E
A
E
D
C
B
Waterline
II
III
IV
I
Waterline
Waterline
V VI
Stern thruster I
II
III
min
IV
max
V VI
Tunnel
(mm • in)
Length
SE170/250TC IP 417 • 16.4 340 • 13.4 250 • 9.84 60 • 2.36 200 • 7.8 350
• 13.8 350 • 13.87
SE170/250TC IP
Thrust at 10.5V/21V*
(kg • lbs)
Thrust at 12V/24V*
(kg • lbs)
Typical boat size
(ft • m)
Tunnel I.D.
(mm • in)
Propulsion system
Power at 10.5V/21V*
(kw • Hp)
For DC system
(V)
Weight
(kg • lbs)
Rec. CCA
(DIN** 12/24V)
Item Code 12V
Item Code 24V
Item Code 12V PRO*
Item Code 24V PRO*
170 • 374
210 • 462
50’ - 72’ • 15 - 22
250 • 9.8’’
Twin Counter rot.
8 • 10.7
24
44 • 97
- / 550
SE170/250TC(-IP)
SEP170/250TC(-IP)
