background image

EOM - WFG

1.2

SICUREZZA COMPAGNIE RIUNITE

General regulations

1.1 - INTRODUCTION

-  This manual must be carefully read by the persons that will be wearing the hardhat 

and the goggles and those that will be carrying out the maintenance operations.

-  The  hardhat  and  the  goggles  guarantee  the  performance  for  which  they  were  de-

signed only if they are properly used and maintained according to the instructions in 

this manual. Otherwise the protective features cannot be guaranteed.

-  The warranties on these products shall become invalid if the warnings, precautions 

and instructions contained in this manual are not followed.

-   Should you have any doubts about the conditions of use or the maintenance proce-

dures after reading this manual, please do not hesitate to contact:

  SICOR S.p.A.

  Via C. Pisacane n.  23/a

  20016 PERO (MI)

  Tel. +39 02 3539041

  Fax. +39 02 3539060

  e-mail [email protected]

  internet: http://www.sicor-sureco.it

1.1.a - How to consult the manual

-   This manual must be kept for the entire lifetime of the PPD used 

-   This manual is divided into chapters covering different topics. 

  An index is given at the beginning of each chapter for easier consultation. The chapter 

number is shown at the bottom left or right of each page and at the top of the page the 

topic dealt with in the chapter.

-  The following symbols are used in this manual to point out safety messages:

 

RISK TO PERSONS

 

 

Partial or total inobservance of the rules pointed out with this symbol may 

cause serious risks to the health of the user of the hardhat and the gog-

gles.

 

IMPORTANT INFORMATION 

 

This symbol indicates important communications for proper use or mainte-

nance of the hardhat and the goggles.

Summary of Contents for R5840X EOM WFG















































Reviews: