W I 1 8 0 C - P B | P R O F I B U S C O U P L E R
8018416.YM10/COMAT/ 2015-03-13 | S I C K A G
Subject to change without notice
9
3
PRODUCT DESCRIPTION
3
Product description
3.1
Product characteristics
The WI180C-PB is an interface coupler, which can be used to connect connected
devices (e.g. WLL180T) to the PROFIBUS DP. The relevant devices are connected via a
simple plug system on the side of the coupler.
Usually, the entire system is mounted on a mounting rail close to the application.
The coupler supports up to 16 connected devices, which are likewise connected to one
another via the plug system.
Further properties:
−
Profibus DP-V1 Slave
−
Option to communicate via function block (e.g. Siemens SFB52 or SFB53).
Pre-configured SICK function blocks are available to download from
.
−
Transmission rates of 9.6 Kbits/s–12 Mbit/s
Further specifications can be found in the technical data (
).
3.2
Setup and function
1
D-sub connection (RS485),
9-pin, PROFIBUS
4
Power supply connection
(M8), 4-pin
2
Switch station no. ×10
5
Bus male connector
(system bus)
3
Switch station no. ×1
6
Status LEDs
