W I 1 8 0 C - P B | P R O F I B U S C O U P L E R
8018416.YM10/COMAT/ 2015-03-13 | S I C K A G
Subject to change without notice
1 4
5
MOUNTING
4. Push the series-connected devices onto the 5-pin connection on the left side of the
WI180C-PB. Make sure that the sequence is correct (see the operating instructions
for the relevant device).
5. Fix the connected devices on the mounting rail without any spaces.
5.5
Connecting the device
Note:
Switch the power supply off before you connect or replace the devices.
1. Connect the male D-sub connector for the PROFIBUS connection to the PROFIBUS
connection on the WI180C-PB and secure it using the knurled screws.
2. Connect the female M8 connector on the power supply to the underside of the
WI180C-PB and screw the male connector tight.