![background image](http://html.mh-extra.com/html/sick/safers/safers_mounting-instructions_1264564032.webp)
5
Installation
5.1
Install the control
WARNING
To prevent tampering, make sure the control is only accessible to authorized personnel
(e.g. key-locked electrical panel).
1. Mount the control on the DIN rail.
2. Make electrical connections.
5.2
Install the application
Note
: if the execution process fails, it may be that the dependencies needed by the
application are not installed on the computer. To receive assistance, get in touch with
the local SICK subsidary.
1. Download the safeRS Designer and safeRS3 Designer application depending on the
used control from the
www.sick.com
website.
2. Install the application on the computer.
5.3
(only for safeRS Control) Start the safeRS Designer application and define the
working frequency
1. Connect the control to the computer using the USB cable with a micro-USB
connector (micro-B type).
2. Supply power to the control.
3. Start the safeRS Designer application.
4. Click
Login
.
5. Enter the admin password.
Note
: if not yet set, set a valid password. Memorize the admin password and provide
it only to people who are authorized to change the configuration.
6. Click
Settings
>
General
.
7. In
Operational frequency
if the system is installed in one of the countries with
national restrictions, select the restricted band, otherwise select the full band.
Note
: this setting does not have any effect on system performance.
5.4
(only for safeRS3 Control) Start the safeRS3 Designer application
1. Connect the control to the computer using a data USB cable with a micro-USB
connector or the Ethernet cable (if an Ethernet port is available).
2. Supply power to the control.
3. Start the safeRS3 Designer application.
4. Choose the connection mode (data micro-USB or Ethernet).
Note
: the default IP address for the Ethernet connection is 192.168.0.20.
5. Set a new admin password, memorize it and provide it only to people who are
authorized to change the configuration.
6. Select the device (safeRS/safeRS3 mixed system or safeRS3).
MOUNTING INSTRUCTIONS
8024924/1FGF/2022-03-01 | SICK
Subject to change without notice
M O U N T I N G I N S T R U C T I O N S | safeRS, safeRS3
32