3
The section that is now read is taught in as a background. Move the sensor over
the background.
12345
4
Depending on the type of window start, quit the teach-in process by
■
Pressing the Set pushbutton when the progress bar is shown on the display
Or
■
Deactivating windowing via the trigger input line
Or
■
Sending the “Trigger window stop” (ISDU 2 – Value 227) system command to
the sensor.
The background teach-in process is now complete. The sensor waits for the
print to be taught in. Now position the sensor in front of the lettering to be
taught in.
5
Start to teach in the print either by
■
Pressing the Set pushbutton when “Prt” is shown on the display
Or
■
Activating windowing via the trigger input line
Or
■
Sending the “Trigger window start” (ISDU 2 – Value 226) system command to
the sensor.
6
The section that is now read is taught in as a reference pattern. Move the sensor
over the print.
12345
12345
12345
12345
12345
12345
6
OPERATION
20
O P E R A T I N G I N S T R U C T I O N S | PSS Prime
8022051/2018-01-31 | SICK
Subject to change without notice