13
8015964/ZSL8/2018-04| SICK
O P E R A T I N G I N S T R U C T I O N S | MPR
Subject to change without notice
INSTALLATION
4
Fig. 5: Cable ducts
1 Power supply
2 Ethernet machine network
3 Ethernet internet
4 MPR 4G version: Antenna
4.6
Connecting the main power supply
1.
Lead the power cable (power input,
see “Technical data”, page 26
) through the cable
glands (fixing range: 10 ... 14 mm).
2.
Connect flexible wires to the circuit breaker and PE terminal.
Line cross-section: 0.5 ...4 mm
2
.
Fig. 6: Connection on circuit breaker
1 PE
2 L1
3 N
1
2 3
4
NOTICE:
The cable ducts have specific diameters. Do not interchange the cable ducts.
CAUTION: Hazards by voltage
The following tasks must be performed by a skilled electrician who is aware of potential
hazards.
NOTICE:
A protective conductor must always be connected to the PE.
1
2 3
