5
8025999/V1-0/2021-02| SICK
O PE R A T I N G I N S T R U C T I O N S | MICS3/OS3 electr. protection hood
Subject to change without notice
ABOUT THIS DOCUMENT
1
1
About this document
1.1
Limitation of liability
1.2
Purpose of this document
This document describes the MICS3/OS3 electr. protection hood
1.3
Target groups
This document is intended for qualified persons who install, operate and do maintenance
work on the MICS3/OS3 electr. protection hood.
1.4
Further information
Special local conditions
The local laws, regulations, technical rules and internal company operating instructions at
the operation site must be observed.
Storage of documents
This document and other relevant technical documentation/information:
●
Must be kept available for reference.
●
Must be handed over to new system operators/new specialist personnel.
Note
This document about the MICS3/OS3 electr. protection hood:
●
Contains information that is required during the life cycle.
●
Must be made available to all those who work with it.
●
Must be read through carefully and it must be ensured that the contents are fully
understood.
Note
Applicable standards and regulations, the latest state of technological development, and
the many years of knowledge and experience of the manufacturer have all been taken
into account when assembling the data and information contained in this document.
We would therefore like to point out that the manufacturer accepts no liability in particu
-
lar in the following cases:
●
Failure to observe this document.
●
Non-compliance with notes and regulations.
●
Unauthorized mounting and installation.
●
Unauthorized technical and other modifications.
●
Use of spare parts, wear and tear parts, and accessories not authorized by the manu
-
facturer.
●
Unauthorized changes, adjustments and/or manipulations.
●
Failure to perform and document regular maintenance work.
The actual scope of delivery may differ from the features and illustrations shown here
where special variants are involved, if optional extras have been ordered, or as a result of
the latest technical changes.
