![background image](http://html.mh-extra.com/html/sick/lms4000/lms4000_operating-instructions-manual_1263986007.webp)
2
Safety information
2.1
Intended use
The 2D LiDAR sensor LMS4000 is intended exclusively for use in industrial environ‐
ments. Radio interference may result when used in residential areas.
The device measures objects of any shape during continuous output of measurement
data.
The following contour data is output to the customer’s computer via the Ethernet inter‐
face for further processing.
•
Angle correction values: Deviation from implicit angular position
•
Distance values: Distance from zero point in the corrected angular position
•
Remission values: Object remission as a dimensionless scale value or a percent‐
age calibrated grayscale value in the corrected angular position
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
2.2
Improper use
Any use outside of the stated areas, in particular use outside of the technical specifica‐
tions and the requirements for intended use, will be deemed to be incorrect use.
•
The device does not constitute a safety component in accordance with the respec‐
tive applicable safety standards for machines.
•
The device must not be used in explosion-hazardous areas, in corrosive environ‐
ments or under extreme environmental conditions.
•
Any use of accessories not specifically approved by SICK AG is at your own risk.
WARNING
Danger due to improper use!
Any improper use can result in dangerous situations.
Therefore, observe the following information:
■
Device should be used only in accordance with its intended use.
■
All information in these operating instructions must be strictly observed.
2.3
IP technology
NOTE
SICK uses standard IP technology in its products. The emphasis is placed on availability
of products and services.
SICK always assumes the following prerequisites:
•
The customer ensures the integrity and confidentiality of the data and rights
affected by its own use of the aforementioned products.
•
In all cases, the customer implements the appropriate security measures, such
as
network separation, firewalls, virus protection, and patch management.
SAFETY INFORMATION
2
8023198//2018-06-18 | SICK
O P E R A T I N G I N S T R U C T I O N S | LMS4000
7
Subject to change without notice