Betriebsanleitung
Kapitel
5
ISD400
8012620/YYZ3/2016-08-01
© SICK AG • Deutschland • Alle Rechte vorbehalten
97
Commissioning
In the default setting "Align" /
"AUTO" = "ON", both the reception
level of the opposing receiver
(E
↓) and current receiver (I ↑)
can be read without a change of
location. If the alignment is good,
the status LEDs of both ISD400
devices must be active.
Switch to RUN mode to drive on
and repeat the realignment if
required.
The optical alignment aid with
crosshairs serves to further simplify
the alignment.
Use a straight mechanical aid if
necessary, e.g. a long bubble level,
in close proximity for alignment if
the opposing ISD cannot be seen
clearly enough via the optical
alignment aid.
