SICK ICR 84x Operating Instructions Manual Download

Page: 29 / 182

Operating instructions

Chapter

ICR 84x Image Code Reader

Installation

8 010 961/0000/10-05-2005

4-1

Installation

4.1

Overview of installation sequence

•

Selecting the installation location for the ICR

•

Aligning the ICR with the code (adjusting the reading distance)

•

Mounting the ICR

•

Installing the CDB 420 or CDM 420 Connection Module

•

Connecting the IRC to the CDB 420 or CDM 420 Connection Module

•

Adjusting the ICR

•

Installing the reading pulse sensor for triggering the reading pulse

Note

Don’t open the device. The producer warranty will be forfeited if the device is opened.

4.2

Installation preparations

4.2.1

Laying out the components to be installed

•

ICR 84x Image Code Reader

4.2.2

Laying out accessories

•

Mounting bracket no. 2 025 491 with 2 M5 x 16 mm (0.63 in) screws (not included in

the ICR scope of delivery)

– or –

Alternatively, if the bracket is supplied by the user:

Stable installation device that allows the alignment of the ICR to be varied in the x and

y axes. The ICR weighs approx. 900 g (31.75 oz) with the connection cable.

Two M5 screws for the ICR. The screw length depends on the wall thickness of the

bracket used. Depth of engagement in

ICR max. 8 mm

(0.31 in)

from housing surface

•

CDB 420 or CDM 420 Connection Module (not included in the scope of delivery of the

ICR)

•

Reading pulse sensor(s) for external reading pulse trigger, e. g. photoelectric reflex

switch(es)/photoelectric proximity switch(es) (not included in the scope of delivery of

the ICR)

4.2.3

Laying out the required tools

•

Two M5 screws for fastening the SICK mounting bracket (strength: 8 mm (0.31 in)) to

the installation base. The screw length depends on the wall thickness of the base

•

Tool

•

Protractor

Summary of Contents for ICR 84x




















































































































































































Search results

Summary of Contents for ICR 84x

Reviews:

Related manuals for ICR 84x

Brands by name

Popular brands

SICK ICR 84x, Operating Instructions Manual

Search results

Summary of Contents for ICR 84x

Reviews:

Related manuals for ICR 84x

Brands by name

Popular brands