background image

3

Product description

3.1

Setup and function

The safety locking device is an interlocking device consisting of a mechanically-actu‐
ated position switch and a coded actuator. The actuator has a lower coding level. The
position switch contains a rotating switching cylinder which the actuator grips during
closing. The switching cylinder is locked or unlocked electromagnetically (variant-depen‐
dent).

When inserting and removing the actuator, switching contacts for door monitoring are
opened and closed. When locking and unlocking the locking device, switching contacts
for locking device monitoring are opened and closed.

If the locking device is locked, the actuator cannot be removed from the actuating head.
The locking device can only be locked when the protective device is closed.

3.2

Product characteristics

3.2.1

Product variants

The safety locking device is delivered in different variants. You will find an overview of
important distinguishing features of the variants in the following.

Locking principle: operating or standby current

Type of contacts for door monitoring

Maximum locking force

Complete overview of all variants: 

see "Ordering information", page 24

Standby current locking principle

i15-M

Locking locking device: close protective device, no voltage on the magnet

Unlocking locking device: apply voltage to magnet

If voltage is interrupted at the magnet, the locking device remains locked and the pro‐
tective device cannot be opened immediately.

WARNING

The locking device locks even when voltage is not present
People could get trapped.

b

If people are in the hazardous area, do not close the protective device even volt‐
age is not present.

Operating current locking principle

i15-E

Locking locking device: apply voltage to magnet

Unlocking locking device: disconnect voltage from magnet

If voltage is disconnected at the magnet, the locking device is unlocked and the protec‐
tive device can be opened immediately.

PRODUCT DESCRIPTION

8

O P E R A T I N G   I N S T R U C T I O N S | i15 Lock

8020548/ZT59ZT59/2019-01-17 | SICK

Subject to change without notice

Summary of Contents for i15 Lock





























Reviews: