Characteristic
Open GMP measuring probe
Gas-testable GPP measuring
probe
Dust load
≤
3 g/m
3
Relative to 1 m measuring dis‐
tance, depending on applica‐
tion
≤
30 g/m
3
Probe lengths available [m]
1,1
1,1
Active measuring paths availa‐
ble [mm]
250/500
250/500
3.6
Control unit
Control unit with connection line (4 m)
The control unit AWE serves in the measuring system as user interface and prepares
and outputs the measured values and performs control and monitoring functions.
The control unit can be located in the vicinity of the sender/receiver unit. It can also be
located up to about 1000 meters from the sampling point, e.g., installed in the switch
center or monitoring center of the industrial plant.
Functions:
•
Output of measured values, computed data and operating states
•
Communication with the peripheral equipment
•
Output of error messages and other status signals
•
Access during service (diagnosis)
3.7
Accessories
Weather protection hood
The weatherproof cover is used when the measuring system is operated outdoors. It is
available as an accessory.
Figure 6: Weatherproof cover
3
PRODUCT DESCRIPTION
20
O P E R A T I N G I N S T R U C T I O N S | GM901-02
8008932/16YT/V4-0/2022-02 | SICK
Subject to change without notice
