SICK CLV620 Operating Instructions Manual Download Page 66

Page: 66 / 106

Chapter

Operating Instructions

CLV62x Bar Code Scanner

8011965/S345/2008-04-16

Maintenance

8.2.1

Cleaning the reading window

Important

Electrostatic charges cause dust particles to stick to the reading window. This effect can be
combated by using anti-static SICK synthetic cleaner (no. 5600006) in combination with a
SICK lens cloth (no. 4003353).

Damage to the reading window!
Reduced reading capacity due to scratches or smears on the reading window!

The reading window for versions CLV62x-xxx0 is made of glass.

Do not use aggressive cleaning agents.

Do not use cleaning agents which cause increased abrasion (e.g. powder).

Avoid cleaning motions on the reading window which could cause scratches or abra-
sion.

Damage to the reading window!
Reduced reading capacity due to scratches or smears on the reading window!

The reading window for versions CLV62x-xxx1 is made of plastic.

Only clean the reading window with a damp cloth.

Use mild cleansing agents without powder. Do not use strong cleansing agents such
as acetone.

Avoid cleaning motions on the reading window which could cause scratches or abra-
sion.

Summary of Contents for CLV620








































































































Search results

Summary of Contents for CLV620

Reviews:

Related manuals for CLV620

Brands by name

Popular brands

SICK CLV620, Operating Instructions Manual

Search results

Summary of Contents for CLV620

Reviews:

Related manuals for CLV620

Brands by name

Popular brands