Operating Instructions
Chapter
2
CLV 45x Bar Code Scanner
Safety information
8 009 139/K949/06-06-2002
©
SICK AG · Division Auto Ident · Germany · All rights reserved
2-1
2
Safety information
2.1
Authorized users
The CLV must be installed and operated by qualified personnel in order to ensure that it
functions correctly and safely.
The following qualifications are required for the various activities:
2.1.1
Installation and maintenance
•
Basic practical technical training
•
Knowledge of the common safety instructions at the workplace
2.1.2
Electrical installation and replacing devices
•
Practical electrical training
•
Knowledge of the common electrical safety instructions
•
Knowledge of the operation and handling of the devices of the respective application
(e. g. transport unit)
2.1.3
Startup, operation and configuration
•
Knowledge of the operation and handling of the devices of the respective application
(e. g. transport unit)
•
Knowledge of the software and hardware environment of the respective application
(e. g. transport unit)
•
A basic knowledge of Windows 95
TM
/98
TM
, Windows NT
TM
or Windows XP
TM
•
Basic knowledge of a HTML browser, for example, Netscape Navigator
TM
•
Basic knowledge of data transmission
•
Basic knowledge of bar code technology
2.2
Intended use
The CLV detects and decodes bar codes automatically. It is installed in a reading station and
reads, for example, bar codes on objects of a conveyor belt.
The CLV transfers the data contents of the decoded bar code via the host interface to a host
for further processing.
The user forfeits any warranty claims against SICK AG in case of any other use as well as in
case of changes to the device, also during device installation and electrical installation.
2.3
General safety instructions and protective measures
¾
Read the general safety instructions thoroughly and observe them strictly at all activities
at the CLV. Also observe the warnings before operating instructions in the individual
chapters of this document.
