manualshive.com logo in svg

SICK C4-RD, Operating Instructions Manual

Share
Download
SICK C4-RD Operating Instructions Manual Download Page 77

16

List of figures

1.

Sender and receiver................................................................................................... 10

2.

Device overview.......................................................................................................... 11

3.

Sender indicators....................................................................................................... 12

4.

Receiver indicators..................................................................................................... 12

5.

Hazardous point protection........................................................................................13

6.

Access protection....................................................................................................... 13

7.

Hazardous area protection.........................................................................................14

8.

Minimum distance to the hazardous point for orthogonal (rectangular) approach
to the protective field..................................................................................................18

9.

Representation of the accessibility of electro-sensitive protective device by reach‐
ing over. Left: Protective field that cannot be reached over. Right: Protective field
that can be reached over........................................................................................... 19

10. Minimum distance from reflective surfaces............................................................. 19
11. Graph of minimum distance from reflective surfaces............................................. 20
12. Preventing mutual interference from system

 

1

 and system

 

2

............................. 20

13. Trouble-free operation due to reversed direction of transmission of system

 

1

 and

system

 

2

.................................................................................................................... 21

14. Dual-channel and isolated connection of OSSD1 and OSSD2................................22
15. No potential difference between load and protective device.................................. 22
16. Schematic representation of operation with restart interlock.................................24
17. Test rod check: Step 1................................................................................................28
18. Test rod check: Step 3................................................................................................28
19. Sender and receiver must not be installed such that they are rotated 180° relative

to each other...............................................................................................................31

20. Mounting the QuickFix bracket to a profile............................................................... 35
21. Mounting the FlexFix bracket to a profile frame....................................................... 36
22. Inserting the safety light curtain in the FlexFix brackets......................................... 37
23. Mount the Compact FlexFix bracket on a profile frame...........................................38
24. Insert the safety light curtain in the Compact FlexFix brackets.............................. 39
25. Dual-channel and isolated connection of OSSD1 and OSSD2................................45
26. No potential difference between load and protective device.................................. 45
27. System connection (male connector, M12, 5-pin)................................................... 45
28. QuickFix bracket: adjust vertically............................................................................. 50
29. FlexFix bracket: adjust vertically/rotate.................................................................... 51
30. Compact FlexFix bracket: Rotate............................................................................... 52
31. Swivel mount bracket: Rotate.................................................................................... 52
32. Dimensional drawing of sender and receiver........................................................... 65
33. Dimensional drawing of the QuickFix bracket.......................................................... 70
34. Dimensional drawing of the FlexFix bracket............................................................. 70
35. Dimensional drawing of the Compact FlexFix bracket............................................. 71
36. Dimensional drawing of the flat mount bracket....................................................... 71
37. Dimensional drawing of the swivel mount bracket...................................................72

LIST OF FIGURES 

16

8025644/19Z2/2021-03-09 | SICK

O P E R A T I N G   I N S T R U C T I O N S | C4-RD

77

Subject to change without notice

Summary of Contents for C4-RD

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands