!
§
$
"
a
b
a
b
Figure 20: Mounting the QuickFix bracket to a profile
5.3.2
Mounting the FlexFix bracket
Overview
In the FlexFix bracket, the sender and receiver can be rotated ± 15° around their
longitudinal axis.
2 FlexFix brackets are used to mount the sender and receiver.
The FlexFix bracket is suited for devices with a protective field height of 250 mm or
greater.
Important information
NOTICE
The housing of the safety light curtain can become scratched if the screw heads
protrude when the FlexFix brackets are mounted on the back.
This can be avoided by taking one of the following measures:
b
Use flat-head screws with washers.
b
If using cylinder head screws, use 2 screws per bracket and no washers.
NOTE
The FlexFix mounting kit (part number 2073543) contains 2 FlexFix brackets, one
alignment tool, and the required screws, sliding nuts, and washers.
NOTICE
The AR60 optional laser alignment aid can be used from a protective field height of
250 mm.
MOUNTING
5
8025644/19Z2/2021-03-09 | SICK
O P E R A T I N G I N S T R U C T I O N S | C4-RD
35
Subject to change without notice
