NOTICE
The AR60 optional laser alignment aid can be used from a protective field height of
250 mm.
Mounting method
Table 5: Lateral and rear mounting of the Compact FlexFix bracket on a machine or profile frame
Mounting
method
Description
On the side
With the M5 screw through the Compact FlexFix bracket on the machine or
profile frame. A screw nut or threaded hole is required on the machine or
profile frame (
!
).
With the M5 screw through the Compact FlexFix bracket on the profile
frame. 2 sliding nuts are required on the profile frame (
"
).
On the back
With the M5 countersunk screw through the Compact FlexFix bracket on the
machine or profile frame. A screw nut or threaded hole is required on the
machine or profile frame (
§
).
!
"
§
Figure 23: Mount the Compact FlexFix bracket on a profile frame
Approach
1.
After assembling the Compact FlexFix brackets, screw the sender or receiver into
the Compact FlexFix brackets from the front.
2.
Align the sender and receiver. (
"
)
3.
Use an M5 screw to secure the position of the sender and receiver in the Compact
FlexFix bracket.
5
MOUNTING
38
O P E R A T I N G I N S T R U C T I O N S | C4-RD
8025644/19Z2/2021-03-09 | SICK
Subject to change without notice
