O P E R AT I N G I N S T R U C T I O N S | Bulkscan®
8014829/ZV98/2018-05-07 | S I C K
Subject to change without notice
3 4
MOUNTING
5.3.2
Mounting of Bulkscan
®
LMS511 with mounting kit 1
You can use mounting kit 1 to mount the Bulkscan® LMS511 on a mounting surface
(wall, machine).
Mounting kit 1
Fixing screws
M8 x 9
threaded holes
Fig. 14: Mounting with mounting kit 1
Mount mounting kit 1 on the mounting surface.
Mount the Bulkscan® LMS511 on mounting kit 1.
During mounting, observe the dimensional drawings (see "11.4.2 Dimensional draw-
ings mounting kits“ on page 86).
Note
5.3.3
Mounting of Bulkscan
®
LMS511 with mounting kit 2
You can use mounting kit 2 (only in conjunction with mounting kit 1) to align the Bulk-
scan® LMS511 in two planes. The maximum adjustment angle is ±11° in both planes..
Mounting kit 2
Mounting kit 1
Fixing screws
M8 x 9 threaded holes
Fig. 15: Mounting with mounting kit 1 and 2
Mount mounting kit 2 on the mounting surface.
Then mount mounting kit 1 on mounting kit 2.
Mount the Bulkscan® LMS511on mounting kit 1.
Adjust the Bulkscan® LMS511 longitudinally and crosswise.
During mounting, observe the dimensional drawings (see "11.4.2 Dimensional draw-
ings mounting kits“ on page 86).
Note
