![background image](http://html1.mh-extra.com/html/sick/6048105/6048105_operating-instructions-manual_1264712023.webp)
1. General information / 2. Important information
8013362/1DQY/2021/10/12
© SICK AG • Germany • All rights reserved
23
Operating
Instructions
PHT
SICK pressure transmitters are carefully designed and manufactured using state-of-the-art tech-
nology. Every component undergoes strict quality and environmental inspection before assembly
and each instrument is fully tested prior to shipment. Our environmental management system is
certified to DIN EN ISO 14001.
Use of the product in accordance with the intended use
Use the pressure transmitter to transform the pressure into an electrical signal.
Knowledge required
Install and start the pressure transmitter only if you are familiar with the relevant regulations and
directives of your country and if you have the qualification required. You have to be acquainted with
the rules and regulations on measurement and control technology and electric circuits, since this
pressure transmitter is „electrical equipment“ as defined by EN 50178. Depending on the operating
conditions of your application you have to have the corresponding knowledge, e.g. of aggressive
media.
2. A quick overview for you
If you want to get a quick overview, read Chapters 3, 5, 7 and 11. There you will get some short
safety instructions and important information on your product and its starting. Read these chapters
in any case.
2. A quick overview for you