Beachten Sie bei der Auslegung Ihrer Anlage, dass die angegebenen Werte (z. B. Berst-
druck, Überlastgrenze) in Abhängigkeit vom verwendeten Material, Prozessanschluss,
Anschlussfittings und Dichtung gelten.
Technische Daten
PHT
Elektrische Schutzarten
■ Schutzklasse
III
■ Überspannungsschutz
36 VDC
■ Kurzschlussfestigkeit
Q
A
gegen M
■ Verpolschutz
L
+
gegen M
■ Schutzart
Nach IEC 60 529 / EN 60 529 (siehe elektrischer Anschluss). Die
angegebenen Schutzarten gelten nur im gesteckten Zustand mit
Leitungssteckern entsprechender Schutzart
Gewicht
Ca. 0,5 kg (ca. 0,6 kg bei Option Kennlinienabweichung 0,25% der Spanne)
16
© SICK AG • Deutschland • Alle Rechte vorbehalten
8013362/1DQY/2021/10/12
Betriebsanleitung
PHT
7. Inbetriebnahme, Betrieb
Funktionsprüfung
Öffnen Sie Anschlüsse nur im drucklosen Zustand!
Beachten Sie die Betriebsparameter gemäß Punkt 7„Technische Daten“.
Betreiben Sie das Druckmessgerät immer innerhalb des Überlastgrenzbereichs!
Beachten Sie beim Berühren des Druckmessgerätes, dass die Oberflächen der
Gerätekomponenten während des Betriebes heiß werden können.
Das Ausgangssignal muss sich dem anstehenden Druck proportional verhalten. Wenn dies
nicht so ist, kann das ein Hinweis auf eine Beschädigung der Membran sein. Lesen Sie in
diesem Fall in Kapitel 10 „Störbeseitigung“ nach.
Warnung
Vorsicht