Complementary information
Configuration:
•
Name
If a number of devices are used in an application or in a project, a unique device
name helps to tell the individual devices apart.
•
Checksums
A checksum is used as a unique identification for a configuration. Using the
checksum, it is possible to work out whether a setup was changed or whether two
devices have the same configuration.
The checksum of the configuration in the project may not match the checksum
in the device, for example if a field geometry has been modified, but not yet
transmitted to the device.
7.5
Identification
Overview
Figure 46: Identification
1
Parameters for the project and the device
In the
Identification
dialog box, you can optionally enter names and information to
uniquely identify the application, project, and devices.
Device name
If a number of safety laser scanners are used in an application or in a project, a unique
device name helps to tell the individual devices apart.
7
CONFIGURATION
78
O P E R A T I N G I N S T R U C T I O N S | outdoorScan3 Core I/O
8023152/1G5N/2022-06-28 | SICK
Subject to change without notice
