background image

All rights reserved. Subject to change without notice.

1

About this document

This document applies to the outdoorScan3 safety laser scanner and the associated
system plug with the following part numbers:

Safety laser scanners

Safety laser scanner without
system plug

System plug

1094452

1124784

1094451

1124785

2101638

Symbols and document conventions

A

B

References to the figures at the end of this document are indi‐
cated by a black background.

2

Safety information

DANGER

Hazard due to lack of effectiveness of the protective device
In the case of non-compliance, it is possible that the dangerous state of the machine
may not be stopped or not stopped in a timely manner.

b

Observe the enclosed safety notes.

The safety laser scanner is not suitable for the following applications, among others:

Underwater

In explosion-hazardous areas

The device must be protected from environmental influences by means of a weather
hood or other suitable measures. More information can be found in the operating
instructions.

You can find detailed information on how to use the product in the machine documen‐
tation or in the operating instructions of the product.

 

You can obtain declarations

of conformity, certificates, and the current operating instructions for the product at

www.sick.com

. To do so, enter the product part number in the search field (part

number: see the entry in the “P/N” or “Ident. no.” field on the type label).

If you are using the airWiper, you also need to observe the airWiper operating instruc‐
tions.

3

Device overview

Overview: 

A

1

Optics cover

2

Display

3

Keypad

4

USB port

5

Status LEDs

6

Additional LEDs for ON state and OFF state

7

Safety laser scanner without system plug

8

System plug

MOUNTING INSTRUCTIONS

8023258/1G5N/2022-05-31 | SICK

M O U N T I N G   I N S T R U C T I O N S | outdoorScan3 Core I/O

9

Subject to change without notice

en

Summary of Contents for 1094451















Reviews: