- Mo un ting
-
Cho o se the wall mo un ting po si tion;
-
Fix the ma gnet to the wall, using the ap pro pria te
pla stic clip [24] and a 3mm screw; the fi xed ma -
gnet will de fi ne the fi nal po si tion of the re a der;
-
Open the mo un ting/ca ble ho les [21] on the back
co ver;
-
Pla ce the re a der in the right po si tion than the ma -
gnet and mark the wall;
-
Drill and fix the back co ver to the wall;
-
Ca ble the re lay blocks [17], if used.
-
Re gi ster the re a der on the system; for ope ra tion,
ple a se re fer to the Bi Tech con trol pa nel Instal la -
tion Ma nual.
-
Clo se the re a der; is pre fe ra ble to use an ad di tio -
nal self-thre a ding screw of 3.9mm for best
bloc king [10];
War ning!
In case of out do or in stal la tion, the in ter nal
re lay must be used only if the ac cess is pro -
tec ted by the Bi Tech system.
- Re gi ste ring on the system
For the re gi stra tion of the de vi ce on the Con trol
Unit, re fer to the Instal la tion Ma nual of the Con trol
Unit it self.
20