Installation, Use and Maintenance Manual - CFR micro / CFR micro E Series
page 30
page 30
Installation, Use and Maintenance Manual - CFR micro E Series
4.1.3 Technical data
4.1.4 Basic functions
• Unit On-Off
• Fan speed selection Min/Med/Max
• Clock
• Light Source
4.1.5 Keyboard functioning
a) “ON/OFF” key
: press this key to turn the unit on or off
NOTE:
•
when the unit is turned on, the “Unit ON” red led will be shining
•
it is possible turn-on or turn-off the unit and to vary the speed setting even during timer operation
b) “Speed selection” key
: pressing this key, the three fan speeds Low, Medium and High would be interchanged
c) “Clock” key : this key allows to adjust the clock and the daily timer.
•
clock adjusting: press the Clock key once, the clock symbol on LCD display will be shining, then adjust the clock through pres-
sing the increasing key or the Decreasing key . Press and hold the increasing key or the decreasing key more than 6
seconds to fast forward/backward the clock setting.
To save this setting, wait for 6 seconds without any operation.
NOTE:
•
the long press of the M button will erase all settings of the weekly time. The settings for each day including Saturday and
Sunday.
Power supply
230 V ac -15 / +10% Vac; 50/60Hz
Absorbed current
< 1,5 W
Operating conditions
0°C - 50°C U.R./R.H.: 5 ÷ 90 %
Dimension
86 x 86 x15
4.2 TLCM infrared remote controller functioning
1
4
3
2
4.2.1 TLCM infrared remote controller
The TLCM infrared remote controller is suitable for CFR micro E units if the CVE remote controller is also
used.
4.2.2 TLCM Functioning
1 - “ON/OFF” button: press this key to turn the unit on or off.
2 - “HF” button: select the maximum fan speed.
3 - “MF” button: select the medium fan speed
4 - “LF” button: select the minimum fan speed
NOTE:
•
the remote controller TLCM must point at the CVE without any obstacles in the way and at a distance
inferior than 5 meters.
English
